Txawm hais tias lub tank sib tov tig clockwise los yog counterclockwise nyob ntawm tus tsim. Yog tias tus qauv tsim tsis muaj lub cim tig, nws tuaj yeem tig sab laug thiab sab xis. Lub kauj ntawm lub reducer feem ntau ua tau los ntawm sab laug mus rau sab xis. Nws lub kauj yog nyob ntawm hom stirring hniav, thiab cov kev taw qhia (clockwise los yog counterclockwise) yuav tsum tau muab nyob rau hauv dav dav tsim.
Kev sib hloov ntawm lub stirrer tsis tuaj yeem hloov pauv tsis tu ncua, vim qee qhov, lub tshuab nqus pa yog kaw rau ntawm lub tshuab nqus tsev nrog lub ntsuas phoo, thiab cov kev taw qhia kev sib hloov feem ntau yog qhov sib txawv ntawm cov xov. Lub kauj ntawm qhov tso zis ncej ntawm lub reducer yuav tsum zoo ib yam li cov kauj ruam ntawm cov khoom siv, kom lub kauj ntawm lub tswv yim ntawm cov ncej tuaj yeem txiav txim siab, yog li txiav txim siab lub kauj ntawm lub cev muaj zog. Yog hais tias muaj kev sib hloov kev taw qhia ntawm lub reducer ntawm lub stirring lub cev muaj zog, raws li cov kev cai ntawm lub reducer, tus txheej txheem tsim yuav tsum tau raws li qhov yuav tsum tau ntawm cov khoom. Thaum xaiv lub agitator ntawm lub tank sib tov, nws cov kev taw qhia ntawm kev sib hloov yog tsau thiab tsis tuaj yeem hloov pauv arbitrarily.
Stirring container standard: Generally, the turning direction of the stirring shaft should be indicated in the drawing. If forward and reverse rotation is really required, it should be indicated in the technical requirements, and the rotational speed should be specified. However, this is not the case in the actual process. The direction of rotation (normal operation) is indicated in the drawings, for example, the direction of rotation is indicated in the drawings. However, there may be instantaneous or intermittent reversal (abnormal operation) in the actual process. Generally, the speed of reversal is relatively slow and the time is relatively short, so it is not considered, and the strength of the spoiler needs to be calculated. There are also many problems encountered in the actual process. When the motor or process does not support reversal, it will be indicated in the technical requirements that "the rotation direction of the stirring shaft should be consistent with the illustration, and should not be reversed".
